61 13 050 Removing And Installing Or Replacing Fuse Box In Passenger Compartment (Built After 03/2007)

IMPORTANT: Read and comply with notes on handling wiring harnesses and cables.

Necessary preliminary tasks:

Disconnect plug connection (1).

Release wiring harness fastener (2) from fuse box interior (6).

Release screws (3).

IMPORTANT:

Risk of damage!

Carefully fold fuse box interior (6) forwards, feeding battery positive lead (4) in direction of arrow out of fuse box interior holder (5).

Fig 1: Identifying Wiring Harness Fastener & Fuse Box Interior With Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect all plug connections (1) on reverse side of fuse box interior (3).

Remove fuse box interior (3).

Installation:

Battery positive lead (2) must not be damaged.

Make sure wiring harnesses are correctly laid and plug connections (1) are correctly engaged.

Fig 2: Identifying Fuse Box Interior & Plug Connections With Battery Positive Lead

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

If necessary, remove fuses and relays.