64 11 378 Removing And Installing Or Replacing Heater/Air Conditioner Operator Unit (Version With CCC/ASK)

Special Tools Required

IMPORTANT: Read and comply with NOTES ON ESD PROTECTION (ELECTRO STATIC DISCHARGE) !

C ar C ommunication C omputer (CCC)

A udio S ystem K ontroller/Controller (ASK)

Necessary preliminary tasks:

Remove clip-mounted trim. Refer to CLIP-MOUNTED TRIM (Coupe) or CLIP-MOUNTED TRIM (Convertible).

NOTE: The control panel (2) is unclipped by simultaneously

Fit special tool 00 9 340 on either side as shown.

Unclip control panel (2) with trim (1) at fastening points (4) and pull back.

Release corresponding plug connections and detach control panel (2).

Fig 1: Pulling Relevant Control Button

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

IMPORTANT: Risk of damage to operator unit!

Carefully unclip operator unit trim (1) at inner retaining points (2) only.

Fig 2: Identifying Operator Unit Trim

Courtesy of BMW OF NORTH AMERICA, INC.

IMPORTANT: Risk of damage to operator unit (3)!

Carefully unclip operator unit trim (1) at outer retaining points (2) only.

Remove trim (1) from operator unit (3).

Fig 3: Identifying Outer Retaining Points

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Carry out PROGRAMMING/CODING for BMW/MINI service functions in Progman.