41 35 Side Panels
WARNING: This page is about a different variant/trim than selected.
SIDE PANELS - TIGHTENING TORQUE SPECIFICATION TABLE
| - | Type | Thread | Tightening specification | Measure |
|---|---|---|---|---|
| 1AZ Front side panel to body | E63/E64 | M6 x 22 10.9 | - | 12 Nm |
| - | E83 | ST6.3x14 | - | 7 Nm |
| - | E60/E61/E81/E82/E85/E86/E87/E88/E90/E91/E92/E93 | M6 | - | 7.6 Nm |
| 2AZ Front side panel to body | E63/E64 | M6 nut | - | 5 Nm |
| - | E60/E61 | M6 nut | - | 7.6 Nm |
| 3AZ Front side panel to body | E60/E61 | Sheet metal screw ST4.8x19 | - | 7.6 Nm |
| 4AZ Combination holder, side panel, front, to body | E81/E82/E87/E88/E92 | M6 | - | 7.6 Nm |
| 5AZ Side panel, rear, to body | E85/E86 | M6 | - | 7.6 Nm |
| 6AZ Side panel, front, to module carrier/bumper carrier | E70/E71 | M6x16 | - | 8 Nm |
| 7AZ Front side panel to body Area, A-pillar | E70/E71 | M6x16 | - | 6 Nm |
| 8AZ Front side panel to body Area, sill | E70/E71 | Sheet metal screw ST4.8x19 | - | 2.5 Nm |
| 9AZ Front side panel to body Area, cowl panel | E70/E71 | M5x20 | - | 2.5 Nm |
| 10AZ Module carrier, top, to support carrier | E70/E71 | M6x26 | - | 8 Nm |
| 11AZ Module carrier, bottom, to engine carrier | E70/E71 | M6 nut | - | 8 Nm |