65 50 055 Removing and Installing/Replacing Central Information Display

Necessary preliminary tasks: 

• Remove center fresh air grille  . Refer to 64 22 162 REMOVING AND INSTALLING OR REPLACING MIDDLE FRESH-AIR GRILLE .
• Remove Car Communication Computer  . Refer to 65 83 010 Removing and Installing/Replacing Car Communication Computer .

Open monitor (1) as illustrated.

Unfasten screws (2).

Fig 1: Identifying Monitor & Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Disconnect plug connection (2) and release associated wiring harness.

Installation: 

Make sure wiring harness is correctly laid and secured.

Raise central information display (3) on passenger side.

Disconnect plug connection (4).

Feed out associated wiring harness and remove central information display (3).

Fig 2: Identifying Plug Connection, Screws & Central Information Display

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Make sure wiring harness of central information display (3) is correctly routed.