LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 135i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Airbag, Audio, Navigation And Anti-Theft - Repair - E82) >> Stereo Radio, Amplifier >> 65 12 072 Removing and Installing (Replacing) Amplifier (Top Hi-Fi System)

65 12 072 Removing and Installing (Replacing) Amplifier (Top Hi-Fi System)

WARNING: This page is about a different variant/trim than selected.
IMPORTANT: Read and comply with notes on protection against electrostatic damage (ESD protection).  . See 61 35... NOTES ON ESD PROTECTION (ELECTRO STATIC DISCHARGE) (Coupe).

Necessary preliminary tasks: 

Release screws (1) and remove retaining plate (2).

Fig 1: Identifying Screws & Retaining Plate
G05780283Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1).

Detach retaining plates (2) in direction of arrow.

Installation: 

Make sure retaining plates (2) and grommet (3) are correctly seated.

Fig 2: Identifying Plug Connection, Retaining Plates & Grommet
G05780284Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: 

Carry out programming/coding  for BMW/MINI service functions in Progman.