65 11 080 Removing and Installing/Replacing Radio Receiver

Necessary preliminary tasks: 

• Remove operator unit for heater/air conditioner  . Refer to 64 11 377 REMOVING AND INSTALLING OR REPLACING HEATER/AIR CONDITIONER OPERATOR UNIT (VERSION WITHOUT CCC/ASK) .

Release screws (1).

Pull back radio receiver (2) slightly.

Disconnect associated plug connections and remove radio receiver (2).

Installation: 

Make sure the rear guide pin of the radio receiver (2) is correctly seated in the associated mounting.

Fig 1: Identifying Radio Receiver & Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: 

Carry out programming/coding  for BMW/MINI service functions in Progman.