65 75 055 Removing and Installing/Replacing Emergency Power Siren With Tilt Sensor

Necessary preliminary tasks: 

• Remove rear left wheel arch cover  . Refer to 51 71 041 REMOVING AND INSTALLING/REPLACING REAR LEFT OR RIGHT WHEEL ARCH COVER (Coupe).

Release screws (1) and lower complete mounting plate (2).

Unlock and disconnect associated plug connection, remove complete mounting plate (2).

Fig 1: Identifying Screws & Lower Complete Mounting Plate

Courtesy of BMW OF NORTH AMERICA, INC.

Release nut (1) and remove emergency power siren with tilt sensor (2) from mounting plate (3).

Fig 2: Identifying Nut, Sensor And Mounting Plate

Courtesy of BMW OF NORTH AMERICA, INC.