LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 135i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Airbag, Audio, Navigation And Anti-Theft - Repair - E82) >> Airbag Triggering Unit >> 65 77 580 Removing and Installing Seat Position Sensor For Left Or Right Front Seat

65 77 580 Removing and Installing Seat Position Sensor For Left Or Right Front Seat

WARNING: This page is about a different variant/trim than selected.
WARNING:

Note airbag safety instructions!  See 72 00... SAFETY REGULATIONS FOR HANDLING COMPONENTS WITH GAS GENERATORS .

Incorrect handling can activate airbag and cause injury.

Necessary preliminary tasks: 

Cut through cable tie (1).

Release screw (2) and remove seat position sensor (3) from seat rail.

Installation: 

Replace cable tie (1).

Ensure correct cable routing (4).

Fig 1: Identifying Cable Tie, Screw & Seat Position Sensor
G05780310Courtesy of BMW OF NORTH AMERICA, INC.