LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 135i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Sunroof - Repair) >> Mechanical Sun Roof Components >> 54 12 115 Removing And Installing Glass Slide/Tilt Sunroof Lid

54 12 115 Removing And Installing Glass Slide/Tilt Sunroof Lid

WARNING: This page is about a different variant/trim than selected.

Necessary preliminary tasks: 

Release left and right screws (1).

Lift glass slide/tilt sunroof lid upwards to remove.

Installation: 

Replace screws and insert with Loctite.

Adjust  glass slide/tilt sunroof lid. Refer to 54 12 003 Adjusting Glass Slide/Tilt Sunroof Lid .

Tightening torque, see 54 12 01AZ in 54 12 MECHANICAL SUN ROOF COMPONENTS .

Initialize  glass slide/tilt sunroof. Refer to 54 0... Notes On Steel & Glass Slide/Tilt Sunroofs (Initialization/Normalization/Learning Of Characteristic Curve) .

Fig 1: Identifying Glass Slide Screws
G04727385Courtesy of BMW OF NORTH AMERICA, INC.