52 26... Removing And Installing/Replacing Ski Bag With Casing On Rear Seat (Through-Loading System)

Necessary preliminary tasks: 

• Remove center armrest  or filler element  . Refer to 52 26 030 Removing And Installing Complete Center Armrest For Rear Seat Backrest (Through-Loading)  or 52 26 070 Removing And Installing/Replacing Filler Element .

Press ski bag (1) on rear side out of backrest.

Fig 1: Identifying Ski Bag

Courtesy of BMW OF NORTH AMERICA, INC.

Lift off cover (1).

Release screws (2).

Installation: 

Make sure cover is correctly installed.

Fig 2: Identifying Cover & Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Unclip single opening trim (1) towards top.

Installation: 

Plastic clips must not be damaged.

If necessary, replace faulty trim.

Fig 3: Identifying Single Opening Trim

Courtesy of BMW OF NORTH AMERICA, INC.

Remove C-module trim (1) in direction of arrow.

Fig 4: Identifying C-Module Trim

Courtesy of BMW OF NORTH AMERICA, INC.