Special Tools Required

WARNING: This page is about a different variant/trim than selected.

Unclip Bowden cable (1).

Unfasten screws (2).

Unlock catch (3) to center of vehicle and at same time unclip actuator (4) towards bottom.

If necessary, unclip actuator (4) with special tool 00 9 317 .

Fig 1: Identifying Bowden Cable & Catch

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Catches (1) and (2) of actuator (3) must not be damaged.

Bowden cable (4) must be correctly engaged in actuator (3).

Fig 2: Identifying Bowden Cable Correctly Engaged In Actuator

Courtesy of BMW OF NORTH AMERICA, INC.