51 12 162 Removing And Installing/Replacing Rear Bumper Lower Trim (M Technic Aerodynamic Kit)

WARNING: This page is about a different variant/trim than selected.

IMPORTANT:

Risk of damage!

When working on trim panel components, make sure that the sensitive surfaces are not scratched or damaged.

Release screws (1) on bumper lower trim (2).

Unclip bumper lower trim (2) along dashed line and remove.

Fig 1: Identifying Bumper Lower Trim & Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Catches (1) must not be damaged

Replacement:

If necessary, replace trim (2) on bumper lower trim

Fig 2: Identifying Bumper Lower Trim & Catches
Courtesy of BMW OF NORTH AMERICA, INC.