51 16... Removing And Installing/Replacing Trim For Storage Compartment At Rear

WARNING: This page is about a different variant/trim than selected.

Special Tools Required

Version without center armrest:

Partially fit special tool 00 9 317 as illustrated.

Lever trim (1) upwards out of catches (2) and remove.

Fig 1: Identifying Lever Trim & Catches

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Catches (1) on trim (2) must not be damaged.

Fig 2: Identifying Catches On Trim

Courtesy of BMW OF NORTH AMERICA, INC.

Version with center armrest:

Lever out trim (2) on catches (1) with special tool 00 9 317 and remove in direction of arrow.

Fig 3: Identifying Trim & Catches

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Catches (1) on trim (2) must not be damaged.

Fig 4: Identifying Catches On Trim

Courtesy of BMW OF NORTH AMERICA, INC.