LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 135i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Body Equipment - Repair (E82)) >> Mirror, Covers, Ashtray, Shelves, Trays >> 51 16 Removing And Installing/Replacing Protective Cap On Mirror Base

51 16 Removing And Installing/Replacing Protective Cap On Mirror Base

WARNING: This page is about a different variant/trim than selected.

Necessary preliminary tasks: 

Pull the protective cap (1) off the mirror base (2) toward the inside. Installation note:  Fit protective cap (1) flush with mirror base edge.

Fig 1: Fitting Protective Cap Flush With Mirror Base Edge
G00526739Courtesy of BMW OF NORTH AMERICA, INC.