51 16 195 Removing And Installing Center Armrest

WARNING: This page is about a different variant/trim than selected.

Special Tools Required

Lever out cover (1) and release nut (2) underneath.

Fig 1: Identifying Cover & Nut

Courtesy of BMW OF NORTH AMERICA, INC.

Lever out catches (1) on trim (2) with special tool 00 9 317 and remove.

Fig 2: Identifying Catches On Trim With Special Tool

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Catches (1) on trim (2) must not be damaged.

Fig 3: Identifying Catches On Trim

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1) and nuts (2) on center armrest (3).

Fig 4: Identifying Center Armrest, Screws & Nut

Courtesy of BMW OF NORTH AMERICA, INC.

Raise storage compartment (1) slightly and extend center armrest (2) in downwards direction.

Fig 5: Identifying Center Armrest

Courtesy of BMW OF NORTH AMERICA, INC.