51 45... Replacing Side Cover On Instrument Panel
WARNING: This page is about a different variant/trim than selected.
Special Tools Required
Necessary preliminary tasks:
- Pull off mucket from front door in covered area
Unclip cover (1) with special tool 00 9 317 in direction of arrow from instrument panel trim.
If necessary unfasten plug connection.
Installation:
Make sure sealing lip (2) is correctly seated in dashed area.
Retaining clips (1) of cover (2) must not be damaged.
Replacement:
- If necessary, modify or replace switch for front passenger airbag deactivation . See 61 31 038 REMOVING AND INSTALLING (REPLACING) SWITCH FOR PASSENGER AIRBAG DEACTIVATION .