General Notes

WARNING: This page is about a different variant/trim than selected.

Bonding at room and object temperature of 18°C to 25°C.
Newly painted parts may only be bonded after a drying time of at least 24 hours.
Optimal bonding/attachment to the background surface is achieved after approx. 48 hours. Components must not be exposed to mechanical strain beforehand (car wash, strength test, etc.).
Do not touch bonding area.
It is not the length of time that pressure is applied but rather the level of pressure applied that is crucial.
Detaching the adhesive tape after pressing destroys the adhesive layer.
After being pressed on gently, adhesive tape can be pulled off again up to 3 times.