LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 135i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Body Equipment - Repair (E82)) >> Gaskets, Seals, Loose Body Components >> 51 71... Removing And Installing/Replacing Left Spring Support Passage Cover

51 71... Removing And Installing/Replacing Left Spring Support Passage Cover

WARNING: This page is about a different variant/trim than selected.

Necessary preliminary tasks: 

NOTE: Description is shown on the E82 by way of example. There may be differences in detail in the case of other models.
NOTE: Spring strut removed for purposes of clarity.

Release catch (1) and remove cover (2).

Installation: 

Catch (1) must not be damaged.

Note correct position of cover (2).

Fig 1: Identifying Plastic Nuts & Screws
G05779424Courtesy of BMW OF NORTH AMERICA, INC.