51 11 150 Removing And Installing/Replacing Left Or Right Spoiler On Bumper Trim (M Technic Aerodynamic Kit)

WARNING: This page is about a different variant/trim than selected.

NOTE: Prior to removing, pay attention to the exact installation position with respect to the adjoining components.

Release screws (1).

Pull out spoiler (2) towards rear and remove.

Installation:

Make sure spoiler (2) is correctly seated in bumper trim.

Fig 1: Pulling Spoiler

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Modify sheet nut (1), replace if necessary.

Fig 2: Identifying Sheet Nut
Courtesy of BMW OF NORTH AMERICA, INC.