41 14 021 Replacing Front Left Wheel Arch Stripping Operations
WARNING: This page is about a different variant/trim than selected.
NOTE:
Owing to the different engine variants and equipment specifications, not all the components are taken into consideration.
The following list basically represents the removal sequence.
The following list basically represents the removal sequence.
- Disconnect battery negative lead
- Remove bumper trim
- Remove bumper carrier
- Remove headlight
- Remove front panel
- Remove radiator
- Remove A/C system condenser
- If necessary, remove and install intercooler
- Remove hydraulic steering cooling coil
- If necessary, remove intake silencer housing
- If necessary, remove coolant expansion tank
- Remove left wheel arch cover (front section)
- Remove left wheel arch cover (rear section)
- Remove left side panel
- Remove left spring strut
- Remove left wishbone
- Remove brake booster
- Remove sill strip
- Release left wiring harness