41 61 571 Removing And Installing/Replacing Left Hinge For Engine Compartment Lid, (For Vehicles With Active Pedestrian Protection AFGS)
WARNING: This page is about a different variant/trim than selected.
WARNING:
Adhere to the following safety information so as to avoid a danger of injury by the actuator:
The BATTERY NEGATIVE LEAD must be clamped off prior to work on the hinge or engine compartment lid!
Risk of injury.
Support engine compartment lid in fully opened position with suitable apparatus.
Necessary preliminary tasks:
Disconnect BATTERY NEGATIVE LEAD .
Remove ENGINE COMPARTMENT LID .
Unfasten plug connection (1) and disconnect.
Release bolt (2) and remove actuator (3).
Tightening torque 41 61 4AZ .
Release screws (4) and remove hinge.
Tightening torque 41 61 2AZ .
Installation note:
ADJUST hinge together with engine compartment lid.