LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 135i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Collision - Body Panel Repair (E82)) >> Body Panel Repair >> 41 00... Opening Brazed Joints

41 00... Opening Brazed Joints

WARNING: This page is about a different variant/trim than selected.

The "Bonding and Riveting" repair method involves replacing the watertight brazed joint with adhesive.

This gives rise to a new procedure for opening brazed joints.

Grind brazed seam with a belt grinder. This keeps the influence of heat in the area around the brazed seam as small as possible.

IMPORTANT: Never use a gas flame.

All traces of brazing solder do not have to be removed.

Do not grind body panels thin.

scientia non olet · About LEMON Manuals