Information On Dangers/Hazards
WARNING: This page is about a different variant/trim than selected.
- Avoid eye and skin contact.
Wear protective goggles, solvent-resistant protective gloves and protective clothing.
- Do not inhale.
Apply in well ventilated rooms only.
- Completely empty open can after use.
- Remaining amounts which are not used can cause the can to explode on account of a chemical reaction (buildup of heat)!
Alternatively, cool the can containing the non-removed remaining amount for several hours in cold water.
- Do not eat, drink or smoke during this operation.
- Keep heat and ignition sources well away.
- Read the manufacturer's information on hazards/dangers (printed on the can) prior to application.
WARNING:
Application time after mixing: within 8 minutes!