LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 135i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Collision - Body Panel Repair (E82)) >> Body Panel Repair >> 41 00... Corrosion Protection >> Removing Sealing Materials

Removing Sealing Materials

WARNING: This page is about a different variant/trim than selected.
IMPORTANT:
  • Do not burn off PVC material (sealing compound) with a gas burner or similar or heat to temperatures above 180°C. This would generate highly corrosive hydrochloric acid and release harmful fumes.
  • The new lining does not form a satisfactory bond with burnt PVC material which means that subsequent sub-surface rust may set in.

Remove PVC material with a rotating steel brush, or heat PVC to maximum 180°C with a hot air blower and scrape off with a spatula.

scientia non olet · About LEMON Manuals