61 31 037 Removing And Installing/Replacing Light Control Unit

WARNING: This page is about a different variant/trim than selected.

Special Tools Required

Detach mucket (1) in area of trim (2) in direction of arrow.

Lever out trim (2) with special tool 00 9 317 at mounting points (3) and remove.

Fig 1: Identifying Special Tool (00 9 317)

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Retaining lugs (1) on trim (2) must not be damaged.

Fig 2: Identifying Lugs On Trim

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Unlock concealed catches (2) of light control unit (1) through opening created by removed trim.

Unlock concealed catches (2) of light control unit (1) and feed out light control unit (1) in direction of arrow.

Disconnect associated plug connection and remove light control unit (1).

Installation:

Catches (2) of light control unit (1) must not be damaged.
Make sure catches (2) are correctly seated.

Fig 3: Identifying Catches
Courtesy of BMW OF NORTH AMERICA, INC.