LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 135i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (General Electrical System - Repair (E82)) >> Switch >> 61 31 023 Removing And Installing/Replacing Start/Stop Switch

61 31 023 Removing And Installing/Replacing Start/Stop Switch

WARNING: This page is about a different variant/trim than selected.

Necessary preliminary tasks: 

Press catches (2) together and unclip Start/Stop switch (1) with associated ribbon cable in direction of arrow.

IMPORTANT:

Carefully unlock and disconnect associated plug connection for ribbon cable.

Replace the ribbon cable if damaged.

The ribbon cable leads to:

Remove Start/Stop switch (1).

Fig 1: Identifying Stop Switch
G05779992Courtesy of BMW OF NORTH AMERICA, INC.