61 13... Removing And Installing/Replacing Fiber-Optic Cable Connector
WARNING: This page is about a different variant/trim than selected.
IMPORTANT:
Comply with notes and instructions on handling optical waveguides .
Necessary preliminary tasks:
- Remove side section on rear seat backrest on left. See 52 26 008 REMOVING AND INSTALLING/REPLACING REST SIDE SECTION ON LEFT OR RIGHT REAR SEAT BACKREST .
Unlock catch (1) and remove deflection roller (2).
Remove fiber optic cable (3) from deflection roller (2).
Unlock catch on fiber-optic cable connector (5) with a suitable tool (4).
Remove fiber-optic cable connector (5) in direction of arrow from deflection roller (2).
Carefully raise cover cap (1) with a suitable tool and remove from fibre-optic cable connector (2).
Carefully raise lock (1) and pull fibre optic cable (2) out of fibre optic cable plug (3).
Installation:
Make sure fibre-optic cable (2) is correctly seated and engaged in fibre-optic cable connector (3).