LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 135i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (General Electrical System - Repair (E82)) >> Plug Connections, Terminals, Power Distribution Box >> 61 13... Opening Plug Housings And Removing Contacts Of Different Plug Systems >> 61 13... In-line Plugs, 6 To 50-Pin, System Elo

61 13... In-line Plugs, 6 To 50-Pin, System Elo

WARNING: This page is about a different variant/trim than selected.

Unlock lock.

Fig 1: Unlocking Lock
G05478489Courtesy of BMW OF NORTH AMERICA, INC.

Unfasten cable clip.

Installation: 

Cable clip must be reinstalled.

Fig 2: Locating Cable Clip
G05478490Courtesy of BMW OF NORTH AMERICA, INC.

Detach catch (1) from plug housing (2).

Fig 3: Detaching Catch & Plug Housing
G05478491Courtesy of BMW OF NORTH AMERICA, INC.

Press out contact carrier (3) with wiring harness (4) through opening (5).

Fig 4: Pressing Carrier With Wiring Harness
G05478492Courtesy of BMW OF NORTH AMERICA, INC.

Hold down arrester hook (6) of defective contact and pull cable and contact up to secondary lock (8).

Fig 5: Identifying Arrester Hook & Secondary Lock
G05478493Courtesy of BMW OF NORTH AMERICA, INC.

Hold down arrester hook once again in secondary lock (8) and pull cable and contact completely out of contact carrier.

Fig 6: Pulling Cable & Contact Carrier
G05478494Courtesy of BMW OF NORTH AMERICA, INC.