LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 135i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (General Electrical System - Repair (E82)) >> Control Units, Modules >> 61 35 950 Removing And Installing (Replacing) Control Unit For Comfort Access System

61 35 950 Removing And Installing (Replacing) Control Unit For Comfort Access System

WARNING: This page is about a different variant/trim than selected.
IMPORTANT: Read and comply with notes on protection against electrostatic damage ESD   protection)  .

Necessary preliminary tasks: 

Disconnect plug connection (1).

Remove control unit for comfort access system (2) in direction of arrow out of device mount (3).

Fig 1: Disconnecting Plug Connection
G05780056Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: 

Carry out vehicle programming/coding.