61 35 001 Removing And Installing (Replacing) Trailer Module

WARNING: This page is about a different variant/trim than selected.

IMPORTANT: Read and comply with notes on protection against electrostatic damage ( ESD protection) .

Necessary preliminary tasks:

E88:

Remove cover for control units (1).

Fig 1: Identifying Control Units For Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1).

Remove trailer module (2) in direction of arrow from device mounting (3).

Fig 2: Identifying Trailer Module & Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Carry out vehicle programming/coding.