64 11 909 Removing and Installing/Replacing Footwell Temperature Sensor
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 128i, and 2009 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove lower left trim from instrument panel . Refer to 51 45 180 REMOVING AND INSTALLING TRIM FOR INSTRUMENT PANEL, BOTTOM LEFT (Coupe) and/or 51 45 180 REMOVING AND INSTALLING TRIM FOR INSTRUMENT PANEL, BOTTOM LEFT (Convertible).
Disconnect plug connection (1).
Turn footwell temperature sensor (2) in direction of arrow and pull out of heater/air conditioner.
Installation:
Make sure footwell temperature sensor (2) is correctly seated in heater/air conditioner (3).