64 11 906 Removing and Installing/Replacing Ventilation Temperature Sensor
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 128i, and 2009 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove center fresh air grille . Refer to 64 22 162 Removing and Installing Or Replacing Middle Fresh-Air Grille .
Turn ventilation temperature sensor (1) in direction of arrow and pull up and out of mounting (2).
Disconnect plug connection (3).
Installation:
Make sure ventilation temperature sensor (1) is correctly seated in mounting (2).