63 21 101 Replacing Sealing Frame For Left Or Right Rear Light
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 128i, and 2009 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove rear light . Refer to 63 21 180 Removing And Installing/Replacing Left Or Right Rear Light .
Detach sealing frame for rear light pot (1) and sealing frame for side panel (2) completely from rear light (3).
Clean bonding surface and allow to dry.
Installation:
- Centre sealing frame for rear light pot (1) by means of guide (4) and reinforcement (5)
- Make sure sealing frame for rear light pot (1) and sealing frame for side panel (2) are correctly positioned on rear light (3)
- Make sure sealing frame for rear light pot (1) and sealing frame for side panel (2) are glued all round on rear light (3)