LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 135i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 996 (Lights - Repair) >> Rear Light Cluster >> 63 21 055 Replacing Socket Housing For Left Or Right Rear Light

63 21 055 Replacing Socket Housing For Left Or Right Rear Light

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 128i, and 2009 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Follow instructions for handling light bulbs (exterior lights)  . Refer to 63 99 ... Instructions For Handling Light Bulbs (Exterior Lights) .

Expose guides (1) of cover (2).

Remove cover (2) in direction of arrow from luggage compartment wheel arch trim (3).

Fig 1: Removing Cover Of Luggage Compartment Wheel Arch Trim
G05780123Courtesy of BMW OF NORTH AMERICA, INC.

Socket housing for rear light:

NOTE: Luggage compartment wheel arch trim shown removed for purposes of clarity.

Disconnect plug connection (1).

Release wiring harness fastener (2) on socket housing (5).

Unlock catch (3) in direction of arrow.

Remove socket housing (5) from rear light (4).

Remove bulbs  . Refer to 63 99 315 Replacing Light Bulb(s) For Left Or Right Rear Light .

Fig 2: Identifying Socket Housing, Wiring Harness Fastener & Plug Connection
G05780124Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Make sure socket housing (5) is correctly engaged on rear light (4).

Bulb holder, brake/tail light: 

NOTE: Luggage compartment wheel arch trim shown removed for purposes of clarity.

Disconnect plug connection (1).

Turn bulb holder (2) in direction of arrow and remove from rear light (3).

Remove bulb  . Refer to 63 99 315 Replacing Light Bulb(s) For Left Or Right Rear Light .

Fig 3: Identifying Luggage Compartment Wheel Arch Trim
G05780125Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Make sure bulb holder (2) is correctly engaged on rear light (3).