LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 135i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 996 (Lights - Repair) >> Licence Plate Lights >> 63 26 000 Removing And Installing/Replacing Left Or Right Number/License Plate Light >> Special Tools Required

Special Tools Required

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 128i, and 2009 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT: Follow instructions for handling light bulbs (exterior lights)  . Refer to 63 99 ... Instructions For Handling Light Bulbs (Exterior Lights) 

Lever number/license plate light (1) with special tool 64 1 020  in direction of arrow (A) out of rear lid (2).

Remove number/license plate light (1) in direction of arrow (B).

Disconnect plug connection underneath.

Replacement: 

If necessary, remove bulb  . Refer to 63 99 401 Replacing Bulb For Left Or Right Number/License Plate Light .

Note type of bulb  .

Fig 1: Identifying License Plate Light With Special Tool (64 1 020)
G05780129Courtesy of BMW OF NORTH AMERICA, INC.