36 10 209 Checking Front And Rear Wheel For Face And Radial Runout

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 128i, and 2009 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

36 1 030

See WHEEL AND TIRES - SPECIAL TOOLS

Necessary preliminary tasks:

Check wheel bearings

Lift vehicle.

Check wheel with special tool 36 1 030 (measuring fixture) for Lateral Runout .

Fig 1: Checking Wheel With Special Tool 36 1 030 For Lateral Runout

G04767180

Courtesy of BMW OF NORTH AMERICA, INC.

Check wheel with special tool 36 1 030 (measuring fixture) for Radial Runout

Fig 2: Checking Wheel With Special Tool 36 1 030 For Radial Runout

G04767181

Courtesy of BMW OF NORTH AMERICA, INC.

If applicable, remove balance weights.

Check Lateral Runout of rim with special tool 36 1 030 (measuring fixture).

Fig 3: Checking Lateral Runout Of Rim With Special Tool 36 1 030

G04767182

Courtesy of BMW OF NORTH AMERICA, INC.

Check Radial Runout of rim with special tool 36 1 030 (measuring fixture).

Fig 4: Checking Radial Runout Of Rim With Special Tool 36 1 030

G04767183

Courtesy of BMW OF NORTH AMERICA, INC.