34 41... Removing and installing or replacing gaiter for handbrake lever
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 128i, and 2009 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.
Special tools required:
- 00 9 317
See MAINTENANCE AND GENERAL INFORMATION - SPECIAL TOOLS
Unclip gaiter with special tool 00 9 317 .
Pull gaiter (1) over handbrake lever.
Cut cable ties (2) and remove gaiter.
Installation:
Eye of cable tie must face downward.