33 32 165 Removing and installing or replacing tension strut
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 128i, and 2009 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
Observe safety instructions
for raising the vehicle
Driving without the tension strut is not permitted!
Driving without the tension strut is not permitted!
Release screws (1, 3).
Remove tension strut (2).
Installation:
See Tightening torque 33 32 11AZ in 33 32 CONTROL ARMS AND STRUTS (to body).
See Tightening torque 33 32 12AZ in 33 32 CONTROL ARMS AND STRUTS (to compression strut).