LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 135i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 989 (Front Axle - Repair) >> General >> 00...... Raising Vehicle With Trolley Jack

00...... Raising Vehicle With Trolley Jack

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 128i, and 2009 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT: Observe the following trolley-jack-related instructions:
  1. Use only BMW-distributed/approved trolley jacks which have rubber plate contact points.
  2. Trolley jacks must be regularly serviced and always checked for functional reliability before they are used!
  3. Check the rubber plate on the trolley jack prior to each use, replacing if necessary.
    Fig 1: Identifying Trolley Jack
    G04725307Courtesy of BMW OF NORTH AMERICA, INC.
WARNING: The vehicle may be raised with a trolley jack only  at the following jacking points!
  1. Car jacking point
  2. Side car jacking points
  3. Rear differential

    Risk of damage: It is not permitted to raise the vehicle at the rear differential cover!

    Fig 2: Identifying Car Jacking Points And Side Car Jacking Points
    G05777190Courtesy of BMW OF NORTH AMERICA, INC.