25 16 065 Replacing Gaiter (Selector Lever Cover) For Shift Tower

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 128i, and 2009 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove handle . See 25 16 061 Replacing Grip/Knob For Shift Lever .

Carefully pull gaiter taut on leather.
Press frame inwards slightly until catch is released.
Lift out gaiter.

Fig 1: Pulling Gaiter
Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Retaining lugs must not be damaged.

Fig 2: Identifying Retaining Lugs

Courtesy of BMW OF NORTH AMERICA, INC.