23..... Universal Transmission Retaining Bridge

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 128i, and 2009 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

00 1 450 . See MAINTENANCE AND GENERAL INFORMATION - SPECIAL TOOLS -- 128I .
24 0 200 . See 24 0 200 SUPPORT

NOTE:

The transmission retaining bridge 24 0 200 is suitable for both manual and automatic transmissions

IMPORTANT: Adapters and spindles must be adapted for positive locking to the transmission.
(Risk of injury)

Adapt adapters (1) and spindle with thrust piece (3) to transmission.

Adapt length with slide (2).

Screw in spindle (4).

IMPORTANT: Before mounting on assembly stand 00 1 450 , check retaining bridge for secure seating.

Fig 1: Identifying Special Tools (24 0 200)

Courtesy of BMW OF NORTH AMERICA, INC.