23 14 510 Replacing Reversing Light Switch

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 128i, and 2009 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove rear underbody protection

GS6-17DG/BG and GS6-37DG/BG transmissions only.

Disconnect plug connection (1) on reverse gear switch.

Remove reverse gear switch.

Tightening torque, see 23 14 1AZ in 23 14 ELECTRICAL FITTINGS .

NOTE: Illustration similar

Fig 1: Identifying Reverse Gear Switch Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.

GS6-53DG/BG transmission only

Disconnect plug connection (1) on reverse gear switch.

Remove reverse gear switch.

Tightening torque, see 23 14 1AZ in 23 14 ELECTRICAL FITTINGS .

NOTE: Illustration similar

Fig 2: Identifying Reverse Gear Switch Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.