22 32 050 Replacing Crossmember For Transmission Mounting
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 128i, and 2009 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove underbody protection
- Support transmission with lifter.
Unfasten screws (1) and nuts (2).
Remove transmission crossmember.
Tightening torque. See 24 71 1AZ/2AZ in 24 71 TRANSMISSION MOUNTS .
NOTE:
Illustration similar.