22 11 110 Replacing Left Engine Support Arm (N51/N52/N52K/N53)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 128i, and 2009 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove underbody protection at front and rear.
- Secure engine in installation position . See 11 00 670 SECURING ENGINE IN INSTALLATION POSITION (N52) or 11 00 670 SECURING ENGINE IN INSTALLATION POSITION (N51) .
- Remove intake filter housing . See 13 71 000 REMOVING AND INSTALLING/REPLACING INTAKE FILTER HOUSING (N51) or 13 72 001 REPLACING AIR FILTER ELEMENT (N52/N52K/N53)
Release grounding strap from engine support arm.
Release clamp from fuel hose of engine support arm.
If necessary, release screw (1).
Release corrugated tube (2) from retainer.
Release screws (3).
Remove engine support arm.
Installation:
Aluminum screws/bolts must be replaced.
Tightening torque. See 22 11 3AZ in 22 11 ENGINE SUSPENSION .