1700039 Venting and filling cooling system with vacuum filling unit: Notes

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 128i, and 2009 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.

ENGINE SPECIFICATION CHART

Type	Engine	Adapter Y from 17 0 100
E60/E61/E63/E64	All	17 0 113
E65/E66	M54/N52/N62/N62T/N73	17 0 105
E65/E66	M57S/M57T/M67/M67T	17 0 113
E70/E71/E72	All	17 0 113
E81/E82/E84/E87/E88/E89	All	17 0 113
E83	M54/N46/N52K	17 0 105
E83	M47S/M57S/M57T/M57Y/N47	17 0 113
E85/E86	All	17 0 105
E90/E91/E92/E93	All	17 0 113
F01/F02/F03/F04/F07/F10	All	17 0 113
R50/R52	W10	17 0 107 and 17 0 102
R50	W17	17 0 109
R52/R53	W11	17 0 109
R55/R56/R57/R60	All	17 0 109
F25	All	17 0 113

IMPORTANT: Lifetime coolant filling:
Never reuse used coolant!
When replacing and removing components which rely on the corrosion protection effect of the coolant, it is essential to change the coolant. The cooling system must therefore be drained and refilled.
In the case of other removal work involving the draining of part quantities of coolant, replace these quantities which have been drained with new coolant.

IMPORTANT: You must protect the alternator against contamination by coolant when carrying out repair work on the cooling circuit.
Cover alternator with suitable materials.
Failure to comply with this procedure may result in an alternator malfunction.

Note on ordering:

Workshop equipment
Workshop equipment catalogue
Filler unit no. 81 39 2 152 473
Collecting vessel no. 81 49 2 152 347
Adapter: 17 0 100

IMPORTANT: Risk of slipping due to coolant on the floor.
Danger of injury!

Fig 1: Lifting Drip Tray Using Special Tool (00 2 030)

Courtesy of BMW OF NORTH AMERICA, INC.

Catch and dispose of emerging coolant in drip tray (1) and if necessary special tool 00 2 030 (universal hydraulic lifting equipment).