11 23 010 Removing And Installing/Replacing Vibration Damper (N52K)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 128i, and 2009 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove underbody protection. See 51 47 490 REMOVING AND INSTALLING/REPLACING FRONT UNDERBODY PROTECTION .
Remove drive belt . See 11 28 010 REPLACING ALTERNATOR DRIVE BELT (N52K) .

Release screws (1).

Tightening torque. See in VIBRATION DAMPER .

Remove vibration damper (2).

Fig 1: Identifying Screws And Vibration Damper

Courtesy of BMW OF NORTH AMERICA, INC.

Assemble engine.