11 37 010 Removing And Installing/Replacing Intermediate Levers (N52K): Notes

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 128i, and 2009 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

For the following special tools, refer to ENGINE- SPECIAL TOOLS (N52K) .

11 4 270
11 4 450
11 4 481

IMPORTANT: Aluminum-magnesium materials. No steel screws/bolts may be used due to the threat of electrochemical corrosion. A magnesium crankcase requires aluminum screws/bolts exclusively. Aluminum screws/bolts must be replaced each time they are released. Aluminum screws/bolts are permitted with and without color coding (blue). For reliable identification: Aluminum screws/bolts are not magnetic . Jointing torque and angle of rotation must be observed without fail (risk of damage) .

NOTE: There are 2 different versions of the guide block

IMPORTANT: Establish size of guide blocks.
Version 1
Size 55.2 mm
Version 2
Size 58 mm
The description of version 2 starts on page 8.