00 00 614 Service - rear brakes
WARNING: This page is about a different car, the 2010 BMW 128i, 2009 BMW 128i, and 2008 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
See BRAKES - REPAIR .
- Service - rear brakes
- Change brake pads , clean brake air ducts
- Brake discs
- Check surfaces and thickness.
- If necessary: Replace
- Handbrake
- Check condition, brake lining thickness and function
- If necessary: Replace
- Reset CBS display according to factory specification
NOTE:
- Clean brake air ducts.
- Replace brake disks if they drop below minimum thickness (refer to BRAKES - TECHNICAL DATA ) and in event of scoring, heat cracks or thickness difference.
- Apply a thin coat of grease to wheel centering on light alloy wheels, refer to STEERING AND WHEEL ALIGNMENT - OPERATING FLUIDS .
- Issue a separate invoice for replacing the brake discs and handbrake shoes.