11 00 Removing And Installing/Replacing Acoustic Cover (N51)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 128i, and 2009 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove microfilter housing . See 64 31 092 REMOVING AND INSTALLING/REPLACING MICROFILTER HOUSING (LOWER SECTION) .

Unfasten screws.

Tightening torque. See 11 12 6AZ in CYLINDER HEAD WITH COVER .

Remove acoustic cover (1).

NOTE: For purposes of improved clarity, illustration and descriptions shows wiring harness and tension strut removed.

Fig 1: Locating Acoustic Cover

Courtesy of BMW OF NORTH AMERICA, INC.