11 8 180 Holder

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 128i, and 2009 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.

Minimum set: Mechanical tools

NOTE: Blocking flywheel when releasing and tightening down central bolts on vibration damper

Engine: M47T2, M47TU, M57T2, M57TU, M67, N43, N45, N45T, N46, N46T, N47, N47S, N51, N52, N53, N54, W17

Storage location: C45, C46

SI number: 1 12 99 (452)

Order number: 11 8 180 Holder

Fig 1: Identifying Holder (11 8 180)

Courtesy of BMW OF NORTH AMERICA, INC.

Consisting of:

2 = 11 8 182 Locking piece

3 = 11 8 183 Basic body

4 = 11 8 184 Adapter

NOTE: E65/M67

5 = 11 8 185 Adapter with setting sleeve

NOTE: E46 M47TU